: :  PRODUCTS : :
 
 

SUCCESS COMPACT Ladders

 

LED Headlamp

 

Convex Mirrors

 

Allegro Blowers

 

Personal Protective Equip.

 

UVEX Safety Eyeware

 

Microgard Protective Clothing

 

Gloves

 

Height Protection

 

Respiratory

 

Gas Detectors

 

LIBERTY Safety Shoes

 

Sorbants & Spill Containment

 

LockOut & TagOut

 

Road Safety

 

Photoluminiscent Stickers

 

Eye Wash & Showers

 

Fire Fighting Equipment

 

Fire Proximity Suits

 

Fibre Glass Ladders

 

Miscellaneous Products

    
 
Allegro Blowers


Allegro Blowers 


COM-PAX-IAL Blower
8" PLASTIC COM-PAX-IAL BLOWER (220V / 50 Hz) WITH OR WITHOUT CANISTER

Models: 9533-E, 9533-15E, 9533-25E


CONSTRUCTION:
  • Lightweight, corrosion, UV, and chemical resistant polyethylene housing & canister assembly
  • Durable construction design and super quiet
  • Available as blower (9533-E) only or complete unit with storage canister and 15' ducting (9533-15E) or 25' ducting (9533-25E)
  • Canister attaches to intake or output side of blower for suction or ventilation
  • Bottom enclosure to protect electrical components
  • Built in On/Off switch
  • Polypropylene nine blade fan with steel/powder coated grill
  • Carry handle molded into blower and canister housing
SPECIFICATIONS:
    MOTOR:
  • HP: 1/3 HP 220V AC, 50 Hz, Single
  • Amperage: 1.9 Amp.
  • Max RPM: 2800 (Loaded at 220 Volts, 50 Hz)
  • Cord: 20’ AWG Model 9533-15E
  • Switch: ON/OFF switch
    DUCTING: (Included on 9533-15E and 9533-25E models)
  • Single-Ply Lightweight Vinyl/polyester, PVC coated 150° F Temp resistant
  • Non-Collapsible Retractable design
  • Class 1 hard drawn spring steel wire helix, ASTM 227 Specs
  • Yellow with black wear-strip and integrated nylon attachment strap
BLOWER DIMENSIONS:

Blower P/N Length Width Height Weight
9533-E 13 Ό” 12” 13 Ύ” 17 lbs
9533-15E 32” 13 ½” 14 Ύ” 33 lbs
9533-25E 32”13 ½” 14 Ύ” 38 lbs

FLOW RATES: (flow rates with 15' of 8'' ducting)

Blower P/N Free Air One 90° Bend Two 90° Bends
9533-E Series 979 CFM 768 CFM 592 CFM

Explosion proof blower


 

 

 


Statically Conductive Ducting
VENTILATION BLOWER, EXPLOSION PROOF CENTRIFUGAL FAN, 220V / 50 Hz

Models: 9503-E, 9503-15E, 9503-25E


CONSTRUCTION:
  • 8'' Flange on intake and exhaust side
  • Tough “safety orange” Polyethylene construction
  • One piece housing with integrated handle
  • 16 gauge, black powder coated steel base
  • Steel handle
  • Aluminum blower wheel with aluminum hub
  • Zinc plated grill
  • Equipped with four (4) rubber feet
SPECIFICATIONS:
    MOTOR:
  • HP: 3/4 HP, UL Listed, CSA Certified. CE Registered
  • Voltage: 220V AC, Single Ζ 50 Hz.
  • Max RPM: 1425 (Loaded at 220 Volts, 50 Hz) Nom EF: 66%
  • Current Draw: 4.8 A (at 230V)
  • Cord: 25’ SJOOW, 12/3 AWG, 90C 300V
  • Plug: NEMA 220V 30A, Hazardous Location “UGP” Type
    HAZARDOUS LOCATION RATING:
  • Class I Div. I & II, Group D
  • Class II Div. I & II, Groups F and G
    DUCTING: Part No. 9500-15EX or 9500-25EX models (Optional)
  • Black, Single-Ply Lightweight Vinyl/polyester, Neoprene coated (upto 180° F Temp resistant.)
  • Retractable, Non-collapsible design, Class 1 hard drawn spring steel wire helix, ASTM 227 Specs
  • Meets requirments UL-94-VO, Rated to 100,000 OHMS or less per square inch
  • Integrated with extended solid grounding wire at each end
BLOWER DIMENSIONS:

Length (cm) Width (cm) Height (cm) Weight (Kg)
24” (60.9) 19” (48.3) 23”(58.4) 76 Lbs (34.2)

FLOW RATES: (flow rates with 15' of 8'' ducting)

Free Air (m3/h) One 90° Bend (m3/h) Two 90° Bends (m3/h)
1335 CFM (2268.2) 935 CFM (1588.5) 765 CFM (1299.7)

Venturi Blowers







 


Venturi Blower Operation
VENTURI BLOWERS
The Venturi Blowers from Allegro are a perfect solution to moving air in refineries, utility and power plants, shipyards, paper and pulp plants, the marine and steel industry and manhole operations. Anywhere where fumes that may be poisonous, explosive or hazardous from process towers, tanks, large pipes or confined space need to be removed. You can cool workers in elevated temperature conditions, or cool heavy equipment that may be in danger of overheating or that needs to be cooled in order to work on, with a blast of directed air. Our line of high-performance, lightweight Venturi Blowers help to create a safe, healthy working environment leading to greater efficiency and productivity. Welding fumes, hot air, gases and smoke can all be removed quickly and easily. And our Venturi Blowers can also be used to move fresh air into a manhole.
Models: 9518-03S, 9518-03, 9518-06, 9518-08


OPERATION Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from the compressed air source) run through the casting and out the nozzle jets, creating a venturi action or pulling action that creates large volumes of air through the venturi and out the air diffuser. A 1/2” hose with a “crows foot” connection is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this Venturi Blower on air or steam lines limited to 140 psi.

CONSTRUCTION:
  • Lightweight construction
  • Convenient carry handles for one-person portability to any location
  • No guards required
  • Multiple inlet ports
  • Sturdy steel galvanized steel diffuser
  • All models include a crow’s foot inlet connection
  • Static ground is attached to the base of all blowers
  • Single piece cast aluminum inlet housing
SPECIFICATIONS:
Part Number Overall Length Diameter of Base Diameter Top of Horn NPT Size Bolt Circle Diameter Basic Slot Diameter Net Weight
9518-03S 16.75” 7.31” 6.0” 1/2” 6.56” 0.4 5.5 lb
9518-03 30.5” 7.31” 7.0” 1/2” 6.56” 0.4 8.5 lb
9518-06 44.25” 11.25” 12.5” 10.5” 0.4 22.3 lb
9518-08 46.06” 14.37” 14.25” 13.62” 0.5 36.0 lb

AIR FLOW
Part No Inlet Pressure
40 PSIG 60 PSIG 80 PSIG
AIR CONSUMED
9518-03S 36 SCFM 50 SCFM 62 SCFM
9518-03 36 SCFM 50 SCFM 62 SCFM
9518-06 73 SCFM 98 SCFM 124 SCFM
9518-08 114 SCFM 152 SCFM 193 SCFM
  TOTAL AIR FLOW
9518-03S 815 CFM 981 CFM 1182 CFM
9518-03 1017 CFM 1231 CFM 1482 CFM
9518-06 2385 CFM 2885 CFM 3347 CFM
9518-08 3152 CFM 4152 CFM 4929 CFM

GUARDRAIL
MANHOLE GUARDRAIL

Model: 9501

The Allegro Manhole Guardrail is designed as a simple one-piece construction that offers easy, no-tools assembly. Guardrail locks open and two hooking chains provide protected entry and exit. For added safety, the rail accommodates signs, flags, or lights. For convenience, it can be used with a guard rail tent, umbrellas or the Allegro winch.

FEATURES:
  • Made from High quality 1” diameter steel tubing
  • Durable yellow high visibility powder coated finish
  • Designed to protect an area of 33” X 33”
  • Support arm gives guardrail added support
  • Two chains with hook for additional security
  • 2 welded marker flags
  • Simple one-piece construction assembles without the use of tools
  • Disassembles to 32” X 4” for compact storage
DIMENSIONS:
Length (Disassembled) Width (Disassembled) Height (Disassembled) Weight
32½” (33”) 33Ό” (3”) 44½” (44½”) 34 lbs

WINCH FOR GUARDRAIL
HAND OPERATED WINCH FOR GUARDRAIL

Model: 9501-10

Raising and lowering equipment into confined space can be impossible without this durable winch. It is lightweight and portable, allowing easy mounting on Allegro guardrails.

FEATURES:
  • 300-pound workload limit
  • 3:1 safety factor
  • 3” drum center
  • 1” diameter center pipe 36” in length
  • Two 7” discs (11” apart) to hold rope in place.
  • ½” holes (2” apart) accommodates 3/8”X 2Ό” Loxall pins
    CRANK:
  • Gear covers
  • Bronze bushings
  • 2 Independent ratchet systems for additional load security
  • Double disc automatic load lock braking system to assure positive load control
    SNAP HOOK:
  • 9/16” Safety snap design
  • Work load of 1,000 lbs with a 5:1 safety ratio
    ROPE:
  • Length: 35’
  • Material: ½” Dura-Plex braided
  • Safety Workload: 1,340 lbs, safety factor of 5:1
  • Tensile Strength: 6,700 lbs
  • Breaking Point: 5,400 lbs
    LEG EXTENSIONS:
  • High quality steel
  • Painted Yellow
DIMENSIONS:
Length Width Height Weight
36” 7½” 36” 39 lbs

WARNING: Not for use as a personal retrieval device

NOVA 2000 BLASTING HELMET
NOVA 2000 BLASTING HELMET

Model: NV2000 SERIES

The NV2000 is NIOSH approved with a flow control valve and air temperature controller for abrasive blasting applications. Our tough polyethylene helmet shell meets penetration requirements of ANSI Z89.1. It is also U.V. stabilized and abrasion resistant. Breathing air evenly flows throughout the helmet minimizing lens fogging and cooling the user. The lightweight helmet padding ensures comfortable and proper fit for workers.

FEATURES:
  • Wrap around wide angle inner and outer lens for wide field of vision
  • Removable lens frame with secured strong latch
  • The rubber window frame gasket provides a seal from dust
  • Meets NIOSH requirements for sound levels inside the helmet
  • Multi-layered sound dampening foam minimizes noise
  • Weight is 4.3 lbs which makes for better comfort
  • 28” nylon cape to protect from rebounding abrasive
  • 5 3/8” hanging strap on top of helmet for easy storage and cleaning
    DOWNTUBE:
  • Non-toxic PVC inner and outer material
  • 33” heavy duty abrasion resistant flexible breathing tube
  • Located behind the helmet allowing it to be out of the way
  • Replacement breathing tube assembly (Part# NV2021)
    INNER LENS:
  • High impact Polycarbonate (meets ANSI Z.87.1-03+)
  • 8 11/16” X 4 3/4”
  • Replacement inner lens available (PN NV2018, 10 pkg.)
    OUTER LENS:
  • Clear co-polyester
  • 10 5/8” X 5 1/8”
  • Replacement lens peel offs (PN NV2017, 50 pkg.)
  • Replacement outer lens available (PN NV203 1, 50 pkg.)
NIOSH APPROVAL:
Approval No. TC-19C-363 (Use only Allegro approved airlines.)

ASTRO BLASTING HELMET
ASTRO BLASTING HELMET

Model: 02-800 SERIES

Astro Helmet is a low cost alternative for workers in abrasive blasting applications. It is NIOSH approved with high pressure and low pressure air sources. Breathing air evenly flows down the front of the helmet minimizing lens fogging and cooling the user. The helmet is a super lightweight abrasion resistant polyethylene shell. Available with flow control valve or low pressure adapter.

FEATURES:
  • Large inner and outer flat rectangular lens for wide field of vision
  • PVC window frame gasket provides seal
  • Lens frame with molded hinged and secured with an easy to grab rubber latch, even with gloved hand
  • Flexible breathing tube
  • 28” nylon cape to protect from rebounding abrasive
  • Removable hard hat type suspension for easy adjustment
  • Lightweight (3.4 lbs) for better comfort
  • 5 3/8” hanging strap for easy cleaning and storage
    DOWNTUBE:
  • Non-toxic PVC inner and outer material
  • Located behind the helmet
  • 33” heavy duty flexible breathing tube
    INNER LENS:
  • High impact Polycarbonate (meets ANSI Z.87.1-03+)
  • 7 5/16” X 5 3/16”
  • Replacement inner lens available (PN 02-810, 10 pkg.)
    OUTER LENS:
  • Clear Co-polyester
  • 6 15/16” X 4 3/4”
  • Replacement tear off lens available (PN 02-8 16, 50 pkg.)
  • Replacement outer lens available (PN 02-811, 50 pkg.)
NIOSH APPROVAL:
Approval Number TC-19C-417 (Use only Allegro approved airlines)

SARAN HOOD

MAINTENANCE FREE SARAN HOOD
Model: 9911-20S
Designed with one piece construction. Breathing tube and head suspension integrated in hood assembly. Heat taped seams to enhance the seal against liquid and gas.

BENEFITS:

  • Increased protection against hazardous material
  • Offers non permeability to air and moisture

  • VORTEX CLIMATE CONTROL TUBE
    VORTEX CLIMATE CONTROL TUBE

    Model: 4000-01

    Vortex tubes are an effective, low cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. The air temperature controller adjusts the amount of air to the helmet and adjusts air temp 25 degrees cooler than the ambient air for use in hot environments.

    AIR QUALITY:
    The respirator's air source must be supplied at all times with clean breathable air, Grade D or better as defined by the Compressed Gas Association. (Commodity Specification G-7. 1)
    CONSTRUCTION:
    Body: Plastic
    Fitting: 1/4 "Quick-connect (Rectus style) stainless steel
    Belt: Nylon
    PSI Range: 60-85 psi
    Weight: 1.3 lbs
    Color: Blue body with black control valve
    BENEFITS:
  • Lightweight for better comfort
  • Provides continuous cool air delivery
  • No moving parts
  • Easy to adjust control valve, even with gloved hands
  • Will cool compressed air by 25°
  • Belt adjust to fit up to 50-inch waist NIOSH APPROVAL:
    NIOSH approved to supply a continuous flow of cool compressed air to the Astro or Nova 2000 supplied air respirator (approval number TC-19C-363)( USE ONLY NIOSH APPROVED AIRLINE HOSE)

  • HIGH PRESSURE AIRLINE HOSE
    HIGH PRESSURE AIRLINE HOSE

    Models: 9101-25B, 9101-50B, 9101-100B

    Airline hose is NIOSH approved, when used with Allegro Supplied Air Hood respirators. Manufactured with Hansen quick-connect couplers.
    CONSTRUCTION:
  • Inner polyvinyl chloride
  • Reinforced braided polyester yarn
  • Outer black polyvinyl chloride
  • 80 Shore A-Durometer
    SPECIFICATIONS:
    Temperature Range: -20°F to 150° F
    Inner Diameter: 3/8” (0.594”)
    Outer Diameter: 19/32” (.0594”)
    Maximum Pressure: 185 psi @70° F
    AIR FITTINGS:
    Manufacturer: Hansen
    Design: Industrial Interchange
    Type: Quick-Connect
    Air Fitting Size Ό” nominal
    Coupler: 1100 Series, chrome plated brass (P/N 9700-74A)
    Plug: 10 Series, steel (P/N 8400-04A)
    AVAILABLE LENGTHS:
    25 Feet Part No: 9101-25B
    50 Feet Part No: 9101-50B
    100 Feet Part No: 9101-100B

  • AIRLINE FILTER


    FILTER CARTRIDGE
    AIRLINE FILTER

    Model: 3000-01

    The Airline Filter is designed to remove oil mist, water vapor and particulates down to 0.5 microns from breathing grade compressed air. The Airline filter is placed inline between the breathing air source and the respirator airline hose, air enters the filter through the inlet port. Once the air has been filtered, moisture is removed and drained through a drain valve located at the bottom of the airline filter. The Airline Filter meets OSHA regulation 1910.94 (6) (i), requiring a trap and carbon filter to be installed and it also meets 1910.94 (6) (ii) by providing a pressure reducing valve to reduce pressure to the requirements of supplied air respirators.
    CONSTRUCTION:
    Body: Heavy gauge steel, powder coated (Blue) Impact and corrosion resistant
    Valve: Balanced valve design, Brass/ Nitrile
    Relief Valve: Brass, spring loaded (External) Inlet 1” NPT
    Fitting: Ό” Rectus Quick-Connect
    Max Temp: 140° F (60° C)
    Max Pressure: 125 psi
    Pressure Gauge: Analog, 0-150 psi
    Legs: ABS Plastic (Can be used to mount the airline filter on a wall or as a stand)
    FILTER CARTRIDGE: (Replaceable, P/N 3100-02)
    Large capacity filter cartridge provides better and longer filtration. Made of felt, polyester wadding, quality activated carbon, and quality activated alumina material, this filter helps trap water, oil, dust particles, and odors from the compressed air source.
    DIMENSIONS:
    Weight Height Length Depth
    16 lbs 18 Ύ” 12 Ό” 12 Ό”

    * * THE ALLEGRO AIRLINE FILTER DOES NOT REMOVE CARBON MONOXIDE (CO) OR TOXIC GASES * *

    STANDARD VEST FOR COOLING VEST


    PHASE CHANGE INSERTS

    STANDAR VEST FOR COOLING VEST

    Model: 8414-03

    Standar Vest for cooling inserts, ideal for hazmat suits and other protective clothing. Features 4 pockets for inserts, zipper front and added comfort of 2 layers of cotton fabric. Royal blue (inserts not included)

     

     

     

     


    PHASE CHANGE INSERTS Model 8414-11
    Safe non toxic phase change material. Freeze in refrigerator or ice water Delivers a constant temprature of 58deg F for upto 3 hours.Each insert measures 6" x 14" and weights only 16oz. 4/pkt

     

    Top Back



    SUCCESS UDYOG PVT. LTD.
    5D, Jedhe Park, 248 Rasta Peth, Near Hotel Shantai, PUNE - 411 011.Maharashtra, INDIA
    Telefax : +91-020-40188288/44/45/25/33, 9371919702, 9371457344
    Email : sales@successudyog.com